NEC ASPILA EX - Page 546

Program 14 : Trunk Basic Setup
14-01 : Basic Trunk Data Setup
540 Programming Aspila EX Software Manual
07 Outgoing Calls
Use this option to allow/prevent outgoing
calls on the trunk you are programming.
0- prevented
1- allowed
1
08 Toll Restriction
Use this option to enable/disabled Toll
Restriction for the trunk. If enabled, the
trunk follows Toll Restriction program-
ming (ex: Programs 21-05, 21-06). If dis-
abled, the trunk is a toll free line.
0- Restriction disable
1- Restriction enable
121-04
21-05
21-06
09 Private line 0- Private line disable
1- Private line enable
0
10 DTMF Tones for Outgoing Calls
Use this option to enable (1) or disable (0)
DTMF tones for outgoing trunk calls.
0- disable
1- enable
1
11 Account code required 0- disable
1- enable
1
12 - Not Used - 1
13 Loop Disconnect Supervision
Use this option to enable (1) or disable (0)
loop supervision for the trunk. This option
is required for Call Forwarding
Off-Premise and Tandem Trunking only.
0- disable
1- enable
0
14 Long Conversation Cutoff
Use this option to enable or disable the
Long Conversation Cutoff feature for
each trunk.
0- disable
1- enable
020-21-03
20-21-04
15 Long Conversation Alarm Before Cut
Off
Use this option to enable or disable the
Long Conversation Alarm for each trunk.
0- disable
1- enable
0
16 Forced Release of Held Call
Use this option to enable/disable forced
release for calls on Hold. If enabled, the
system disconnects a call if it is on Hold
longer than a programmed interval (Pro-
gram 24-01-05). If disabled, forced dis-
connection does not occur. Program
24-01-01 also affects this option.
0- disable
1- enable
024-01-05
17 Trunk to Trunk Warning Tone for
Long Conversation Alarm
Use this option to enable or disable the
Warning Tone for Long Conversation fea-
ture for DISA callers.
0- disable
1- enable
0
Item
No.
Item Input Data Default
Related
Program