NEC ASPILA EX - Page 547

Program 14 : Trunk Basic Setup
14-01 : Basic Trunk Data Setup
Aspila EX Software Manual Programming 541
Default
Conditions
None
Feature Cross Reference
Refer to features in above chart.
18 Warning Beep Tone Signaling 0- disable
1- enable
0
19 Privacy Mode Toggle Option
Use this option to enable or disable a
trunk’s ability to be switched from private
to non-private mode by pressing the line
key or Privacy Release function key.
0- disable
1- enable
0
20 Block Outgoing Caller ID
Allow (1) or prevent (0) the system from
automatically blocking outgoing Caller ID
information when a user places a call. If
allowed (i.e. block, enabled), the system
automatically inserts the Caller ID block
code (defined in 14-01-21) before the user
dialed digits.
0- Allow
1- Block
0
21 Caller ID Block Code
Enter the code, up to 8 digits, that should
be used as the Caller ID Block Code. This
code is automatically inserted before
dialed digits if Program 14-01-20 is set to
‘1’.
Dial (up to 8 digits) -
22 Caller ID to Voice Mail
Enable or disable the system’s ability to
send the Caller ID digits (Remote Log-On
Protocol) to voice mail.
0- disable
1- enable
0
Trunk Port Number Name
001 LINE 001
002 LINE 002
: :
200 LINE 200
Item
No.
Item Input Data Default
Related
Program