NEC UNIVERGE NEAX 2000 IPS - Page 117

– 93 – NWA-008844-001 Rev.5.0
91ch3001.fm
COMMAND CODE
TITLE:
BASIC SERVICE FEATURES
08
BASIC SERVICE FEATURE: 101-199
: Initial Data
BASIC SERVICE FEATURE SETTING DATA
101 When CM08>102: 0 for Single Line Telephone 0
1
The call with STA-B is disconnected,
and STA-A returns to STA-C
Three Party Conference
102 When the station (STA-A), after holding the other station (STA-
C), has made a switch hook flash while talking with another sta-
tion (STA-B)
NOTE: This data is applied to single line telephone station.
0
1
As per CM08>101
STA-B is held, and STA-A returns to
the connection with STA-C
(Broker’s Call)
103 When the station (STA-A), after holding a C.O. call, has made
a switch hook flash while talking with another station (STA-B)
NOTE: This data is applied to single line telephone station.
0
1
As per CM08>104
STA-B is held, and STA-A returns to
the connection with C.O. line (Bro-
ker’s Call)
104 When CM08>103: 0 0
1
The call with STA-B is disconnected,
and STA-A returns to the C.O. line
Three Party Conference
109 Periodic record tone on live record 0
1
To send
Not sent
110 1000-Slot Memory Block number “3” for Speed Calling-Sta-
tion (Station Speed Dialing) is used as the Memory Block for
Speed Calling-System (System Speed Dialing)
0
1
Available See CM20>A150
Not available
111 1000-Slot Memory Block number “1” for Speed Calling-Sta-
tion (Station Speed Dialing) is used as the Memory Block for
Speed Calling-System (System Speed Dialing)
0
1
Available See CM20>A151
Not available
112 1000-Slot Memory Block number “0” for Speed Calling-Sta-
tion (Station Speed Dialing) is used as the Memory Block for
Speed Calling-System (System Speed Dialing)
0
1
Available See CM20>A152
Not available
113 Outgoing C.O. line call from Station-to-Station connection 0
1
Not allowed
To allow
Continued on next page
JULY/01/2006
CM08