– 109 – NWA-008844-001 Rev.5.0
91ch3001.fm
COMMAND CODE
TITLE:
BASIC SERVICE FEATURES
08
BASIC SERVICE FEATURE: 301-398
: Initial Data
BASIC SERVICE FEATURE SETTING DATA
301 When system is initialized 0
1
D
term
MIC lamp ON
D
term
MIC lamp OFF
311 Display last calling station number 0
1
6 seconds
Until next call
Display calling station number when a calling station abandons
a call before the call is answered
[Series 3400]
0
1
Not available
Available
319 On a Tie Line outgoing call with answer signal, transferring/
holding the call before distant called station answers.
NOTE: Effective only when CM35 Y=00 is 03 or 04 and CM35
Y=04 is 02.
0
1
Not available
Available
322 Answering method of Camp-On (Call Waiting Method) 0
1
Same as Camp-On transfer-method
(Switch Hook Flash + Call Hold
access code/Answer key)
Alternating between two calls by
Switch Hook Flash/Answer key
324 Direct-In Termination-Outside
In the case of no release signal on incoming trunk and both
answer and release signals on outgoing trunk
0
1
Allowed
Restricted
331 Sender Prepause for outgoing call via attendant 0
1
To provide
Not provided
333 Mail box number sent to VMS when VMS is recalled after
transferring the call to an unanswered station
0
1
To send
Not sent
334 Call to station set with a Return Message Schedule
Display, receives ringing
0
1
Available (Ringing)
Not available (ROT connection)
335 Station number and name display when incoming call begins
ringing in
0
1
Display when incoming call termi-
nates to the Prime Line
Display when incoming call termi-
nates to the Prime Line or My Line
Continued on next page
INITIAL
JULY/01/2006
CM08
To Next Page
Loading...
