– 110 – NWA-008844-001 Rev.5.0
91ch3001.fm
COMMAND CODE
TITLE:
BASIC SERVICE FEATURES
08
: Initial Data
BASIC SERVICE FEATURE SETTING DATA
352 When a call is transferred by Remote Access to System (DISA)
to predetermined station and time-out occurs, the call is contin-
ued or dropped
See CM30 Y=30 CM41 Y=0>39
0
1
Disconnect call
Continue call
353 Buzzer sound when terminating incoming call to attendant that
is in Attendant Console Lockout
0
1
Not provided
To provide
357 Diversion display on D
term
/ATTCON/DESKCON when origi-
nating/terminating a call
0
1
Available
Not available
359 When a call is transferred by Automated Attendant to predeter-
mined station and time out occurs, the call is continued or
dropped
See CM30 Y=30, 31, 32, 33 CM41 Y=0>39
0
1
Disconnect call
Continue call
361 Dial “**” is automatically added to the digits sent to Radio
Paging System
0
1
Allowed
Restricted
362 Confirmation tone after dialing access code for Account Code/
Authorization Code/Forced Account Code
0
1
No tone
Service Set Tone
363 For Automated Attendant call, caller dials while receiving
message or music
0
1
Not allowed
(Allowed after receiving the message
or music)
Allowed
365 Send Dial Tone when holding trunk by Hold key
See CM90 Y=00: F0058
0
1
To send
Not sent
366 Ringing distinction by detecting the ringing signal from main
PBX or Centrex
0
1
Longer Ringing than CM41
Y=2>40: External call
Shorter Ringing than CM41
Y=2>40: Internal call
Longer Ringing than CM41
Y=2>40: Internal call
Shorter Ringing than CM41
Y=2>40: External call
Continued on next page
NOVEMBER/15/2006
CM08
To Next Page
Loading...
