NEC UNIVERGE NEAX 2000 IPS - Page 144

– 120 – NWA-008844-001 Rev.5.0
91ch3001.fm
COMMAND CODE
TITLE:
BASIC SERVICE FEATURES
08
: Initial Data
BASIC SERVICE FEATURE SETTING DATA
475 Sender Tone sending on DOD MFC call/Enhanced 911 0
1
Not sent (No tone)
To send
477 Selection of Backward signal for ANI signal on DOD MFC call
NOTE: The setting data of CM08>477 and 487 must be same.
[Not used in Australia/North America]
0
1
Backward GC
Backward GA
478 Supervision of receiving timing for Backward signal on DOD
MFC call (for Pulse Form signal)
[Not used in Australia/North America]
0
1
Not available
Available
479 Kind of MFC Signaling
[Chinese No. 1]
0
1
Chinese No. 1
Other than Chinese No. 1
487 Selection of Backward signal for ANI signal on DID MFC call
NOTE: The setting data of CM08>477 and 487 must be same.
[Not used in North America]
0
1
Backward GC
Backward GA
489 Type of Single Data Message Frame Format when using the
PN-4RSTC-A card
[Series 3500]
0
1
Without Time Parameter
With Time Parameter
493 CID Call Back 0
1
To provide
Not provided
Continued on next page
INITIAL
INITIAL
INITIAL
CIR INITIAL
JUNE/01/2007
CM08