NEC UNIVERGE NEAX 2000 IPS - Page 145

– 121 – NWA-008844-001 Rev.5.0
91ch3001.fm
COMMAND CODE
TITLE:
BASIC SERVICE FEATURES
08
BASIC SERVICE FEATURE: 502-589
: Initial Data
BASIC SERVICE FEATURE SETTING DATA
502 Name display on the called station when calling from Sub Line
[Series 3600]
0
1
Name display of My Line
Name display of Sub Line
Calling Party Name sending to ISDN when making an outgoing
call from Sub Line
[North America Only]
[Series 3600]
0
1
Name of My Line
Name of Sub Line
503 Send RBT when the called PS/WLAN Terminal is out of cell
(zone) or the power is off
NOTE: Effective only for station-to-station call.
0
1
Not sent
To send
504 PS/WLAN Terminal No-Answer 0
1
Available
Not available
507 Send calling station number to the analog telephone for Caller
ID-Station when an internal call is terminated.
[North America Only]
0
1
Not sent
To send
508 Mask indication (*) for Station Authorization Code entry 0
1
To provide
Not provided
509 Call Forwarding-Override when the Call Forwarding-All Calls
is set to the My Line of D
term
0
1
Call Forwarding-Override
As per CM08>268
510 Station Hunting-Not Available when the called PS/WLAN Ter-
minal is out of cell (zone) or the power is off
0
1
Available
Not available
513 ID registration method for D
term
IP
[Series 3100]
0
1
Protected Login Mode for All D
term
IPs
As per CM15 Y=480
514 Whether the system encodes the station number when D
term
IPs
login to the network
[Series 3100]
0
1
To encode (NEC Original method)
Not encoded
515 Whether the system encodes the password when D
term
IPs login
to the network
[Series 3100]
0
1
Not encoded
To encode (As per CM08>517)
Continued on next page
JUNE/01/2007
CM08