– 134 – NWA-008844-001 Rev.5.0
91ch3001.fm
COMMAND CODE
TITLE:
BASIC SERVICE FEATURES
08
: Initial Data
BASIC SERVICE FEATURE SETTING DATA
816 The line/trunk engaged in communication with the 2nd party is
set in 3rd party line 1 of OAI SMFN STS (status) 1-0 when a
call terminates for Conversation Monitoring (FID=6)/Call Con-
ferencing (FID=8)
[Series 3400]
0
1
To provide
Not provided
The line/trunk engaged in communication with the 2nd party is
set in 3rd party line 2 of OAI SMFN STS (status) 2-0/2-1 when
a call for Conversation Monitoring (FID=6) is answered
[Series 3400]
817 OAI SMFN STS (status) when the forwarded call with Call
Forwarding-All Calls/Busy Line/No Answer (Don’t Answer) is
terminated to a station via CCIS (SMFN FID=1)
[Series 3400]
0
1
SMFN STS=4/5/6
SMFN STS=0
OAI SMFN STS (status) when a station answers via CCIS the
forwarded call with Call Forwarding-All Calls/Busy Line/No
Answer (Don’t Answer) (SMFN FID=2)
[Series 3400]
0
1
SMFN STS=5/6/7
SMFN STS=0
818 Send OAI SMFN when Exclusive Hold
[For EU]
[Series 3400]
0
1
To send
Not sent
820 Display of the monetary unit for ISDN call charge
[Series 3600]
0
1
Monetary unit is not displayed
As per CM04 Y=00>00
NOTE: When setting the second data to 1 and CM04 Y=00>00 is set to 01-31, $ is displayed.
Set this command when monetary unit is not displayed in the area where a dollar is not used.
823 SMDR service for incoming calls of each station assigned by
CM13 Y=05
NOTE: To provide SMDR for abandoned incoming calls, as-
sign second data of CM08>823 to 0 (Ineffective).
[Series 3500]
0
1
Ineffective
Effective
824 DID Development Table for guest station
[Series 3900]
0
1
Development Table 1 for DID number
assigned by CM76 Y=90
Development Table 0 for DID number
assigned by CM76 Y=00
NOTE: Set the second data the same as the DID Development Table number assigned by CM35 Y=170.
Continued on next page
JUNE/01/2007
CM08
To Next Page
Loading...
