– 188 – NWA-008844-001 Rev.5.0
91ch3001.fm
COMMAND CODE
TITLE:
UPDATING OF D
term
IP FIRMWARE/MP PROGRAM DOWNLOAD
(FTP)
0C
: Initial Data
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
51 Downloading MP
program for MP Pro-
gram Download
(FTP) (Main Site)
[Series 3500]
01 Changeover
(changeback)
time
YYYY MM
DD HH mm
000000000000
CCC
NONE
YYYY: Year (2000-2099)
MM : Month (01-12)
DD : Date (01-31)
HH : Hour (00-23)
mm : Minutes (00-59)
Now executing
Clear
No data
NOTE 1: For MP program changeover, the system is reset automatically. Be sure not to
set the time while the system is operating.
NOTE 2: If a specified changeover time is passed while MP program is being downloaded,
the changeover of MP program is executed immediately (second data becomes
000000000000).
NOTE 3: If you set the second data to 000000000000 while MP program is being down-
loaded, the MP program changeover is executed after MP program download is
completed.
NOTE 4: If you set the second data to 000000000000 while matching the program version
of Flash ROMs, the MP program changeover is executed after the program ver-
sion matching is completed.
NOTE 5: This data is cleared after MP program changeover is completed.
NOTE 6: If the system is reset five times during about three minutes, the MP program
changeback is executed automatically.
03 MP program copy
from Flash ROM
1 (upgraded side)
to Flash ROM 0
(outdated side)
0
1
To copy
Not copied
NOTE 1: You can clear the previous MP program by this data setting.
NOTE 2: While the MP program is being downloaded, the second data 0 cannot be as-
signed. If you do that, “WAIT, BUSY NOW” is displayed.
Continued on next page
JULY/01/2006
CM0C
To Next Page
Loading...
