– 193 – NWA-008844-001 Rev.5.0
91ch3001.fm
COMMAND CODE
TITLE:
UPDATING OF D
term
IP FIRMWARE/MP PROGRAM DOWNLOAD
(FTP)
0C
: Initial Data
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
52 Downloading MP
program for MP Pro-
gram Download
(FTP) (Main Site/
Remote Site)
[Series 3700
R12.2]
XX03 MP program copy
from Flash ROM
1 (upgraded side)
to Flash ROM 0
(outdated side)
XX: 00: Main Site
No.
01-30:
Remote Site
No.
0
1
To copy
Not copied
NOTE 1: You can clear the previous MP program by this data setting.
NOTE 2: While the MP program is being downloaded, the second data 0 cannot be as-
signed. If you do that, “WAIT, BUSY NOW” is displayed.
NOTE 3: When the communication between Main Site and Remote Site cannot operate
normally, “HARDWARE ERROR” is displayed.
XX04 Status of MP pro-
gram download
(HEX)
XX: 00: Main Site
No.
01-30:
Remote Site
No.
XX YY ZZ XX: File type
00: MP program file
YY: Downloading file No.
ZZ : Total number of files
NOTE 1: If you set this data other than while the MP program download is executed,
“NONE” is displayed.
Display example:
If you are downloading the third file of 11 MP program files, “00030B” is dis-
played as the second data.
(File type 00=MP program file).
NOTE 2: When the communication between Main Site and Remote Site cannot operate
normally, “HARDWARE ERROR” is displayed.
Continued on next page
JULY/01/2006
CM0C
To Next Page
Loading...
