NEC UNIVERGE NEAX 2000 IPS - Page 223

– 199 – NWA-008844-001 Rev.5.0
91ch3002.fm
COMMAND CODE
TITLE:
STATION NUMBER, TRUNK NUMBER, CARD NUMBER
10
LEN
SETTING DATA (STATION NUMBER, TRUNK NUMBER, CARD NUMBER)
RELATED
COMMAND
DATA MEANING OF DATA
000
763
(PIM
No. 0-7
+
Port No.
00-63)
EB002
EB127
Card number of Digital Announcement Trunk (PN-2DATA/4DATA)
When accommodated in PIM 0/1 ..............EB002-EB031
When accommodated in PIM 2/3 ..............EB032-EB063
When accommodated in PIM 4/5 ..............EB064-EB095
When accommodated in PIM 6/7 ..............EB096-EB127
NOTE: EB000 and EB001 are dedicated to built-in Digital Announce-
ment Trunk of MP card.
CM30
CM49
EC00
EC31
Add-on Module number
When accommodated in PIM 0/1 ................. EC00-EC07
When accommodated in PIM 2/3 ................. EC08-EC15
When accommodated in PIM 4/5 ................. EC16-EC23
When accommodated in PIM 6/7 ................. EC24-EC31
NOTE: The same number (the last two digits of the data) should not be
used, for both DSS Console (E100-E131) and Add-on Module
(EC00-EC31).
CM90
CM98
ED00
ED03
Card number of Conference Trunk (PN-CFT)
EE3 XXX Card number of CS/ZT Interface
XXX represents CS/ZT number (000-255).
CMAD
EFX
EFXXXXXXXX
ISDN line station number
X-XXXXXXXX represents ISDN line station number.
X: 0-9, A (*), B (#)
FX
FXXXXXXXX
D
term
/D
term
IP station number
X-XXXXXXXX represents My Line number.
X: 0-9, A (*), B (#)
CM90
~ ~~ ~
INITIAL
~~
NOVEMBER/15/2006
CM10