– 198 – NWA-008844-001 Rev.5.0
91ch3002.fm
COMMAND CODE
TITLE:
STATION NUMBER, TRUNK NUMBER, CARD NUMBER
10
LEN
SETTING DATA (STATION NUMBER, TRUNK NUMBER, CARD NUMBER)
RELATED
COMMAND
DATA MEANING OF DATA
000
763
(PIM
No. 0-7
+
Port No.
00-63)
E100
E131
DSS Console number (00-31)
When installed in PIM 0/1............. E100-E107
When installed in PIM 2/3............. E108-E115
When installed in PIM 4/5............. E116-E123
When installed in PIM 6/7............. E124-E131
NOTE: The same number (the last two digits of the data) should not be
used, for both DSS Console (E100-E131) and Add-on Module
(EC00-EC31).
CM96
CM97
E201
E215
Card number of PB receiver (PN-8RST)
When installed in PIM 0/1............. E201-E203
When installed in PIM 2/3............. E204-E207
When installed in PIM 4/5............. E208-E211
When installed in PIM 6/7............. E212-E215
(Maximum 32 PB receivers per system.)
NOTE 1: E200 is dedicated to built-in PB receiver of MP card.
(Assignment by CM10 is not required.)
NOTE 2: A maximum of 4 PB receiver number (including built-in PB
receiver) can be used per FP card.
CM45 Y=0, 1,
2, 9
E600
E663
TAS Indicator Interface number activated by station ringer
(Use of LC card)
CM30
Y=13, 14, 17
E800
E831
Card number of External Equipment Interface (PN-DK00)
When accommodated in PIM 0/1 ..............E800-E807
When accommodated in PIM 2/3 ..............E808-E815
When accommodated in PIM 4/5 ..............E816-E823
When accommodated in PIM 6/7 ..............E824-E831
NOTE: Circuit No. 3 of E831 is used for built-in External Equipment
Interface of MP card by setting CM44.
CM44
E900
E963
Card number of External Key Interface (PN-DK00)
When accommodated in PIM 0/1 ..............E900-E915
When accommodated in PIM 2/3 ..............E916-E931
When accommodated in PIM 4/5 ..............E932-E947
When accommodated in PIM 6/7 ..............E948-E963
NOTE: Circuit No. 3 of E963 is used for built-in External Key Interface
of MP card by setting CM61.
CM61
Continued on next page
~
~~ ~~~
CM10
To Next Page
Loading...
