– 218 – NWA-008844-001 Rev.5.0
91ch3002.fm
COMMAND CODE
TITLE:
STATION CLASS-1
12
: Initial Data
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
17 TAPI ADAPTER mode
[Series 3200 R6.1
(R6.1)]
0
3
D
term
65 TAPI ADAPTER on D
term
75 (D
term
Series E)
[Soft Key is not available]
Not used
CM12 Y=22
NOTE 1: When using D
term
65 TAPI ADAPTER on D
term
75, set “0”.
NOTE 2: When the TAPI ADAPTER is not used, set “3”.
NOTE 3: For PN-2DLC/4DLC cards, this data must be assigned to the first LEN (Level 0) of each card.
For PN-8DLC cards, this data must be assigned to the first LEN (Level 0) and fifth LEN (Level 4) of
each card.
Characteristic of LLC (PN-
4LLCB) Card
1
3
Long distance
Short distance
NOTE: When using Series 3600 software or later, a reset of the MP card is not required after this command for
LLC card is set/changed.
When changing the data with online, the data is valid after the LLC card is unplugged and plugged in with
two seconds or more interval. (When using DLC card, a reset of the MP card is required.)
Continued on next page
INITIAL
INITIAL
DECEMBER/02/2005
CM12
To Next Page
Loading...
