– 239 – NWA-008844-001 Rev.5.0
91ch3002.fm
COMMAND CODE
TITLE:
STATION NUMBER, TRUNK NUMBER, CARD NUMBER FOR EACH FP
14
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST
EXE
++ ++14
2ND DATA
DE
1ST DATA
(5 digits) (1-10 digits)
++
DE
Continued on next page
1ST DATA 2ND DATA
RELATED
COMMAND
DATA MEANING DATA MEANING
XX ZZZ XX : FP/Virtual AP No.
(00-63)
ZZZ: AP/Virtual PIM
Port No. (000-127)
X-
XXXXXXXX
Single Line station number (1-8 digits)
Virtual PS station number (1-8 digits)
WLAN virtual station number (1-8 digits)
X=0-9, A (*), B (#)
CM12
CM13
C100
C163
Card number of AMP trunk
(PN-2AMP)
NOTE 1: The card number (C100-C163)
should be assigned to the FP No. 00-
03 as follows.
For FP No. 00: C100-C115
For FP No. 01: C116-C131
For FP No. 02: C132-C147
For FP No. 03: C148-C163
NOTE 2: Do not assign the card number to
the other FP No. than above.
[Series 3200 R6.2 (R6.2)]
CM38
C200
C203
Card number of Caller ID sender
(PN-4RSTF/PN-4RSTF-A/PN-4RSTH)
[North America Only]
[Series 3200 R6.2 (R6.2)]
CM04 Y=01>02
CM45 Y=5
CF00 Virtual station port for visitor
[Series 3500]
NOTE: This data is displayed when reading
the virtual station port for visitor. You
cannot write/clear this data.
CM05 Y=9
~~
JULY/01/2006
CM14
To Next Page
Loading...
