– 241 – NWA-008844-001 Rev.5.0
91ch3002.fm
COMMAND CODE
TITLE:
STATION NUMBER, TRUNK NUMBER, CARD NUMBER FOR EACH FP
14
Continued on next page
1ST DATA 2ND DATA
RELATED
COMMAND
DATA MEANING DATA MEANING
XX ZZZ XX : FP/Virtual AP No.
(00-63)
ZZZ: AP/Virtual PIM
Port No. (000-127)
E100
E131
DSS Console number (00-31)
NOTE 1: For the FP No. 00-03, the DSS Con-
sole number (E100-E131) should be
assigned as follows.
For FP No. 00: E100-E107
For FP No. 01: E108-E115
For FP No. 02: E116-E123
For FP No. 03: E124-E131
NOTE 2: For the FP No. 00-03 of MP built-in
FP/FP card of Main Site and MP
built-in FP of Remote Site, the DSS
Console number (E100-E131) can
be assigned without limit as shown
above NOTE 1.
[Series 3500 or later]
NOTE 3: For the FP No. 04-31, the DSS Con-
sole number can be assigned with-
out limit as shown above NOTE 1.
NOTE 4: The same number (the last two digits
of the data) should not be used for
both DSS Console number (E100-
E131) and Add-on Module number
(EC00-EC31).
[Series 3200 R6.2 (R6.2)]
CM96
CM97
~
CM14
To Next Page
Loading...
