– 243 – NWA-008844-001 Rev.5.0
91ch3002.fm
COMMAND CODE
TITLE:
STATION NUMBER, TRUNK NUMBER, CARD NUMBER FOR EACH FP
14
Continued on next page
1ST DATA 2ND DATA
RELATED
COMMAND
DATA MEANING DATA MEANING
XX ZZZ XX : FP/Virtual AP No.
(00-63)
ZZZ: AP/Virtual PIM
Port No. (000-127)
E600
E663
TAS Indicator Interface number activated by
station ringer
(Use of LC card)
[Series 3200 R6.2 (R6.2)]
CM30
Y=13, 14, 17
E800
E831
Card number of External Equipment Interface
(PN-DK00)
NOTE 1: The card number (E800-E831)
should be assigned to the FP No. 00-
03 as follows.
For FP No. 00: E800-E807
For FP No. 01: E808-E815
For FP No. 02: E816-E823
For FP No. 03: E824-E831
NOTE 2: Do not assign the card number to
the other FP No. than above.
NOTE 3: Circuit No. 3 of E831 is used for
built-in External Equipment Inter-
face of MP card by setting CM44.
[Series 3200 R6.2 (R6.2)]
CM44
~~
JULY/01/2006
CM14
To Next Page
Loading...
