NEC UNIVERGE NEAX 2000 IPS - Page 362

– 338 – NWA-008844-001 Rev.5.0
91ch3003.fm
COMMAND CODE
TITLE:
MFC/MF-ANI TRUNK DATA
31
: Initial Data
Y
1ST DATA 2ND DATA
DATA MEANING DATA MEANING
A 16 Sending ACK-WINK signal to DTI on
receiving MF signal
[North America Only]
0
1
To send
Not sent
NOTE: When the signal pattern from T-1
network is FGD format, assign the
data to “0”.
When the signal pattern from T-1
network is ANI format, assign “1”.
17 Signal kind of called number sent from T1
network
[North America Only]
0
1
DP
DTMF
NOTE: When the signal pattern from T-1
network is FGD format, assign the
data to “1”.
When the signal pattern from T-1
network is ANI format, assign “0”.
18 Sending of ACK-WINK signal to DTI on
receiving DP signal
[North America Only]
0
1
To send
Not sent
NOTE: When the signal pattern from T-1
network is FGD format, assign the
data to “1”.
When the signal pattern from T-1
network is ANI format, assign “0”.
Continued on next page
CM31