EasyManua.ls Logo

NEC UNIVERGE NEAX 2000 IPS - Page 373

NEC UNIVERGE NEAX 2000 IPS
1038 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– 349 – NWA-008844-001 Rev.5.0
91ch3003.fm
COMMAND CODE
TITLE:
TRUNK ROUTE DATA
35
: Initial Data
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
11 Toll Restriction 0
3
To provide
Not provided
CM81, CM8A
CM85
CM35 Y=76
12 Number of digits to be
received on DID for Devel-
opment Table 0
0
1
2
3
1 digit
2 digits
3 digits
4 digits
CM76
CM35 Y=18
CM35 Y=170
13 Maximum number of send-
ing digits allowed on outgo-
ing connection
For C.O. trunks, data assign-
ment is not required.
NONE
000
001
002
003
004
005
254
Ordinary TRK
Radio Paging TRK
Determined by 2 digit + STN
CM35 Y=76 NOTE 1 NOTE 2
Only dialed No. is sent
1 digit 1 digit + STN
2 digits 2 digits + STN
3 digits 3 digits + STN
4 digits 4 digits + STN
5 digits
2 digits + STN
254 digits
NOTE 1: When CM35 Y=76 is set to 15, this
data setting is not required (release
the sender by time out or by answer
signal from the called distant office).
When CM35 Y=76 is set to 00-04,
specify the dialed digits which is
assigned by CM85.
NOTE 2: STN means the calling party’s
station number, and this number is
sent automatically by CM30
Y=28>x6.
CM30 Y=28
CM35 Y=76
14 SMDR/Centralized-Billing-
CCIS for outgoing call
0
1
Not provided
To provide
CM13 Y=06
Continued on next page
~
~
CM35

Table of Contents

Other manuals for NEC UNIVERGE NEAX 2000 IPS

Related product manuals