NEC UNIVERGE NEAX 2000 IPS - Page 389

– 365 – NWA-008844-001 Rev.5.0
91ch3003.fm
COMMAND CODE
TITLE:
TRUNK ROUTE DATA
35
: Initial Data
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
145 Calling party information
transfer to ISDN on tandem
call from CCIS/SIP
0
1
To provide
Not provided
Calling party information
transfer to Enhanced 911
route on tandem call from
CCIS
[North America Only]
0
1
To provide
Not provided
147 Kind of Call Forwarding-
Don’t Answer (No Answer)
key assigned to ATTCON/
DESKCON
0
1
Call Forwarding-Don’t Answer (No Answer)
key assigned by CM90 Y=00: F6068
Call Forwarding-Don’t Answer (No Answer)
key assigned by CM90 Y=00: F6063
CM90
148 System operation when the
station, after holding the
other trunk (TRUNK-A), has
made a switch hook flash
while talking with another
trunk (TRUNK-B)
0
1
Broker’s Call
TRUNK-B is held, and station returns to the
connection with TRUNK-A.
Three-way Calling
150 CID Call Back 0
1
To provide
Not provided
CM12 Y=38
152 Verification of Connection
for Event Based CCIS
0
1
To provide
Not provided
153 ISDN answer signal sending
timing for Event Based
CCIS
0
1
Send when the called party answers the call
Send before the called party answers the call
NOTE: Be sure to set the same data to opposite
office.
154 Information Transfer Capa-
bility of ISDN line used for
Event Based CCIS
5
6
7
3.1 kHz audio
Speech
Unrestricted digital information
155 Calling party number is used
as the ID Code for Remote
Access to System (DISA)
0
1
Available
Not available
NOTE: Assign this data only for Ring down
connection.
CM2A Y=15, A0
Continued on next page
JUNE/01/2007
CM35