– 364 – NWA-008844-001 Rev.5.0
91ch3003.fm
COMMAND CODE
TITLE:
TRUNK ROUTE DATA
35
: Initial Data
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
137 Pulsed E&M
[France Only]
0
1
Pulsed E&M
Standard
138 Sending of received ANI
information from network to
VMS with MCI
0
1
To send
Not sent
139 Roaming Service for Virtual
COT route
[For PCS]
0
1
Available
Not available
CM30 Y=00
140 Roaming Service
[For PCS]
0
1
Available
Not available
141 Pursuit function after Roam-
ing PS
[For PCS]
0
1
To provide
Not provided
NOTE: Set this data only to C.O. line trunk
route of called side PBX when the soft-
ware is Series 3300 or before.
Set this data to C.O. line trunk route of
called side PBX, voice channels trunk
route of D channels, LDT/ODT, and IP
trunk when the software is Series 3400
or later.
142 Protocol type between PBXs
for WCS Roaming
[For PCS]
1
7
Q931a-Digital
None
143 Method to send CCIS chan-
nel number for virtual tie
line on Event Based CCIS
0
1
By Subaddress
By dialed-in digits
144 ISDN-BRI Layer 1 activa-
tion
0
1
Activated by call event
Always activated
Continued on next page
DCH INITIAL
BRT INITIAL
JUNE/01/2007
CM35
To Next Page
Loading...
