EasyManua.ls Logo

NEC UNIVERGE NEAX 2000 IPS - Page 387

NEC UNIVERGE NEAX 2000 IPS
1038 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– 363 – NWA-008844-001 Rev.5.0
91ch3003.fm
COMMAND CODE
TITLE:
TRUNK ROUTE DATA
35
: Initial Data
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
121 Trunk Release detection by
momentary reverse from
C.O. (Busy tone detection
box)
[Not used in Australia/
North America]
0
1
Available
Not available
CM41 Y=2>38
129 Sending method of calling
number from/to network
0
1
3
7
CALLER ID (CLASS SM)
T1-ANI [North America Only]
Enhanced 911 [North America Only]
MFC-R2 [Other than North America]
130 Sending of expanded infor-
mation on Low Layer Com-
patibility (LLC) information
element
[Series 3200 R6.2 (R6.2)]
0
1
Allow
Restricted
CM08>722
CMAC Y=11
133 Indication of reason why the
calling number is not
informed from network
0
1
To indicate
Not indicated
134 TOS field Precedence for IP
trunk/SIP trunk voice packet
TOS: Type of Service
00
07
15
PRECEDENCE 0
PRECEDENCE 7
PRECEDENCE 0
CM35 Y=161
CMA7 Y=44
NOTE: This data setting is ineffective when CM35 Y=161 is set.
135 Kind of trunk route for voice
channel and common signal-
ing channel
0
1
Event Based CCIS route
Other trunk route
136 DP Make Ratio
[France Only]
0
1
50 % Make Ratio
(when CM35 Y=25 is set to 1)
33 % Make Ratio
(when CM35 Y=25 is set to 0)
As per CM35 Y=25
Continued on next page
~
~
DECEMBER/02/2005
CM35

Table of Contents

Other manuals for NEC UNIVERGE NEAX 2000 IPS

Related product manuals