– 362 – NWA-008844-001 Rev.5.0
91ch3003.fm
COMMAND CODE
TITLE:
TRUNK ROUTE DATA
35
: Initial Data
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
101 Call still Hold
[Australia Only]
0
1
Available
Not available
102 Reversal on Idle
[Australia Only]
0
1
Available
Not available
103 Auto Polarity Collection
[Australia Only]
0
1
Available
Not available
104 Polarity of 2-wire E&M/
4-wire E&M trunk (ODT) 1
2
3
E wire
M wire
Open Open Signaling (Type V)
Ground Battery Signaling (Type I)
Ground Ground Signaling (Type V/Type II)
105 Purpose of 2-wire E&M/
4-wire E&M trunk (ODT)
0
1
2-wire E&M Trunk
4-wire E&M Trunk
NOTE: All circuits in one ODT card must be
set as the same type interface.
106 Malicious Call Trace
[Australia Only]
0
1
Not provided
To provide
CM15 Y=211
CM20: A170
CM90 Y=00:
F0A70
CM90 Y=00:
F6120
113 LAPD Mode of D-channel
route for WCS Roaming
[For PCS]
0
1
Network Mode
User Mode
LAPD Mode of D channel
route for Q-SIG
0
1
Network Mode
User Mode
115 Collect Call Blocking
[Brazil Only]
0
1
Available
Not available
CM15 Y=076
119 Forced release for tandem
connection for incoming
trunk
0
1
Available
Not available
CM08>029
CM41 Y=0>54
Continued on next page
DCH INITIAL
DCH INITIAL
NOVEMBER/15/2006
CM35
To Next Page
Loading...
