NEC UNIVERGE NEAX 2000 IPS - Page 561

– 537 – NWA-008844-001 Rev.5.0
91ch3005.fm
COMMAND CODE
TITLE:
DIGIT CONVERSION ON DID CALL
76
: Initial Data
Continued on next page
Y
1ST DATA
2ND DATA
REMARKS
No. MEANING DATA MEANING
34 Specification of
the call terminat-
ing method for
DID incoming call
with no CLI in
Day Mode
[Series 3600]
000-999:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90
0
1
2
3
To transfer to the DAT/another
station/Attendant Console (assigned
by CM51 Y=33)
To reject the call termination
To terminate D
term
with unusual LED
indication/unusual ringer tone/
unusual ringer pattern (assigned by
CM76 Y=37, 38, 39)
To terminate as usual
CM51 Y=33
CM76 Y=33,
37, 38, 39
35 Whether the call
terminating
method is speci-
fied for DID
incoming call with
no CLI in Night
Mode/Mode A/
Mode B
[Series 3600]
0
1
3
Specified when reason of the incom-
ing call with no CLI is “Privacy”
Specified for all incoming call with
no CLI
Not specified
CM76 Y=36
NOTE: Assign the call terminating method by CM76 Y=36 when this command is set to 0/1.
36 Specification of
the call terminat-
ing method for
DID incoming call
with no CLI in
Night Mode/
Mode A/Mode B
[Series 3600]
000-999:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90
0
1
2
3
To transfer to the DAT/another sta-
tion/Attendant Console (assigned by
CM51 Y=33)
To reject the call termination
To terminate the D
term
with unusual
LED indication/unusual ringer tone/
unusual ringer tone pattern (assigned
by CM76 Y=37, 38, 39)
To terminate as usual
CM51 Y=33
CM76 Y=35,
37, 38, 39
DECEMBER/02/2005
CM76