– 539 – NWA-008844-001 Rev.5.0
91ch3005.fm
COMMAND CODE
TITLE:
DIGIT CONVERSION ON DID CALL
76
: Initial Data
Continued on next page
Y
1ST DATA
2ND DATA
REMARKS
No. MEANING DATA MEANING
39 D
term
Ringer Tone
Pattern for DID
incoming call with
no CLI
[Series 3600]
000-999:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90
0
1
2
3
4
5
6
7
Ringer Tone Pattern 0
Ringer Tone Pattern 1
Ringer Tone Pattern 2
Ringer Tone Pattern 3
Ringer Tone Pattern 4
Ringer Tone Pattern 5
Ringer Tone Pattern 6
As per CM76 Y=23
CM65 Y=90
CM76 Y=23,
34, 36
NOTE 1: This command is effective when CM76 Y=34, 36 is set to 0 or 2, and D
term
receives the incoming call.
NOTE 2: For details of the Ringer Tone Pattern see CM65 Y=40.
40 Kind of call
termination
indicator key/lamp
on Attendant con-
sole for DID
incoming call with
no CLI
[Series 3600]
000-999:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90
0
1
6
7
C.O. Incoming Call 0
C.O. Incoming Call 1
C.O. Incoming Call 6
As per CM35 Y=15
CM35 Y=15
CM76 Y=34,
36
NOTE: The command is effective when CM76 Y=34, 36 is set to 0, and the destination of call forwarding is
Attendant console.
41 Mobility Access
function to each
DID number
[Series 3700
R12.1]
000-999:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90
0
1
2
7
To use Mobility Access termination
To set Mobility Access mode
To cancel Mobility Access mode
Not used Mobility Access function
CM15
Y=216
CM64 Y=10
90 Number Conver-
sion Block No. for
Development
Table 1
X-XXXXXXXX:
DID number
000
999
NONE
Number Conversion Block No. 000
Number Conversion Block No. 999
No data
CM35
Y=170-172
~
~
~
~
JANUARY/20/2006
CM76
To Next Page
Loading...
