– 677 – NWA-008844-001 Rev.5.0
91ch3007.fm
COMMAND CODE
TITLE:
H.323/SIP PROFILE DATA
BA
: Initial Data
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
25 Query a DNS server to
get the IP Address
[Series 3600]
00
31
Profile number
for control packet
0
1
Provide
Not provided
CMA7 Y=71
CMBA Y=30
NOTE 1: When the second data is set to “0”, only the IP Address replied from to a DNS server is used. When
the second data is set to “1”, the SIP server IP Address assigned by CMBA Y=30 is used.
NOTE 2: The second data should be set to “1” for IP trunk Point-to-Multipoint connection when the second
data of CMA7 Y=46 is set to 0.
29 Session Timer
refresher kind
[Series 3600]
00
31
Profile number
for control packet
0
1
uas
uac
CMA7 Y=71
CMBA Y=56,
83, 88
30 Gate Keeper/SIP server
IP Address
aaabbb
cccddd
NONE
Gate Keeper/SIP
server IP Address
aaa : 000-255
bbb: 000-255
ccc : 000-255
ddd: 000-255
No data
CM0A Y=79
CMA7 Y=71
NOTE 1: The second data follows the IP Address pattern assigned by CM8A Y=5XXX>167 for IP trunk
Point-to-Multipoint connection when the second data of CMA7 Y=46 is set to 0.
NOTE 2: When SIP Trunk Source IP Address Check is provided by CM0A Y=79: 0, SIP initial is required
after setting this command.
31 Gate Keeper/SIP server
Port number
00
31
Profile number
for control packet
00000
65534
NONE
Gate Keeper/SIP
server Port number
No data
CMA7 Y=71
NOTE: The port number of SIP server is 05060 in general.
Continued on next page
~ ~
IPT INITIAL
IPT INITIAL
SIP INITIAL
~
~
JUNE/01/2007
CMBA
To Next Page
Loading...
