– 48 – NWA-008844-001 Rev.5.0
91ch3001.fm
COMMAND CODE
TITLE:
SYSTEM DATA MEMORY ALL CLEAR
00
NOTE 1: MP Built-in FP is used for controlling Legacy line/trunk cards. Only FP No. 00 is available.
NOTE 2: Virtual FP is used for controlling Peer-to-Peer connection between D
term
IPs on intra-office
and via CCIS.
NOTE 3: CM05 Y=4/8 NONE data are as follows.
FP No. 00: PIM0 and PIM1
FP No. 01: PIM2 and PIM3
FP No. 02: PIM4 and PIM5
FP No. 03: PIM6 and PIM7
FP No. 04-63: No data
AP No. 04-15, 20-63: No data
ASSIGNMENT PROCEDURE:
DATA TABLE:
OFF LINE
+00+ +
MEMORY AREA
++ +
DESIGNATION
CCC
(1/2 digits)
EXE
ST
DEDE
1ST DATA 2ND DATA
DATA MEANING DATA MEANING
1 System data memory all clear for the TDSW-
based PBX system (8 PIMs)
CCC Clear
11 System data memory all clear for the IP-
based PBX system (1 PIM + 7 Virtual PIMs)
CCC Clear
12 System data memory all clear for the IP-
based PBX system (2 PIMs + 6 Virtual
PIMs)
CCC Clear
13 System data memory all clear for the IP-
based PBX system (3 PIMs + 5 Virtual
PIMs)
CCC Clear
14 System data memory all clear for the IP-
based PBX system (4 PIMs + 4 Virtual
PIMs)
CCC Clear
Continued on next page
CM00
To Next Page
Loading...
