– 49 – NWA-008844-001 Rev.5.0
91ch3001.fm
COMMAND CODE
TITLE:
SYSTEM DATA MEMORY ALL CLEAR
00
OFF LINE
1ST DATA 2ND DATA
DATA MEANING DATA MEANING
90 Execute the office data conversion
[Series 3200 R6.2 (R6.2)]
0
1
Start converting
Always displayed after first data “90” is
typed NOTE 2
NOTE 1: When upgrading the software of the system from Series 3300 or before to Series 3400 or later
this data is required.
NOTE 2: When first data “90” is typed, second data “1” is displayed. Also while converting the office
data, “1” is displayed.
NOTE 3: There is no problem even if the office data conversion is executed again and again.
JULY/01/2006
CM00
To Next Page
Loading...
