NEC UNIVERGE NEAX 2000 IPS

To Next Page

To Previous Page

– 740 – NWA-008844-001 Rev.5.0

91ch3008.fm

COMMAND CODE

TITLE:

FAULT INFORMATION STORE/DISPLAY FUNCTIONS

2: External Alarm Kind (MJ/MN/– –) (Continued)

FAULT KIND

(1ST)

CONTENT ALARM KIND

30 DTI line returned to normal condition – –

31 DCH/BRT/PRT D-channel link connection returned to normal condition – –

32 CCH link connection returned to normal condition

CCH/IPT link connection returned to normal condition

[Series 3300 software required]

– –

[Australia

Only]

Number of faulty trunks was less than predetermined number – –

35 Number of lockout stations was less than predetermined number – –

36 DLC card returned to normal condition – –

38 SMDR output buffer memory returned to normal condition – –

3B CS/ZT returned to normal condition – –

3C LAN application returned to normal condition – –

40 Traffic of IP network exceeded limit bandwidth MJ ALARM

41 Traffic of IP network exceeded warning bandwidth MN ALARM

42 Communication error occurrence between Main Site and Remote Site – –

43 SIP fault occurred [Series 3600 software required] – –

48 MP program downloading – –

49 IP component reset occurred – –

50 Traffic of IP network returned to normal condition from limit bandwidth

excess

– –

51 Traffic of IP network returned to normal condition from warning band-

width excess

– –

52 Communication error restoration between Main Site and Remote Site – –

53 SIP returned to normal condition [Series 3600 software required] – –

Continued on next page

DECEMBER/02/2005

CMEA

NEC UNIVERGE NEAX 2000 IPS - Page 764