– 775 – NWA-008844-001 Rev.5.0
91ch3008.fm
COMMAND CODE
TITLE:
ONLINE MP-FP COMMAND OUTPUT
F6
: Initial Data
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
2 MP-FP command out-
put setting
06 Whether to insert a line feed
or not
0
1
Inserted after each command
Not inserted after each com-
mand
NOTE: When executing command output in online mode (SW3 of MP card
set to 0), regardless of second data setting, insert a line feed for
each command.
07 Minute/Second indication 0
1
Add Minute/Second indica-
tion to the header NOTE
Not added Minute/Second
indication to the header
NOTE: This command is effective when 2nd data of CMF6 Y=2>06 is set
to 0.
10 Command Code 00
FE
NONE
Command code to be output
Output all command codes
11
12
20 FP/AP Number 00
63
NONE
FP/AP Number to be output
Output all FP/AP numbers
21
22
Continued on next page
~ ~
JUNE/01/2007
CMF6