– 786 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
SMDR/CIS/PMS FUNCTIONS (1)
D000
: Initial Data
1ST DATA
2ND DATA
DATA FUNCTION
9 In printout of totaled bill for station groups, the station number
of the station of which amount of bill is $0.00 are printed.
0: YES
1: NO
10 In printout of call record for station groups, the station numbers
of the station of which amount of bill is $0.00 are printed.
0: YES
1: NO
11 By Check In operation ( + Station No. + ),
check in time information is printed.
0 : Not available
1 : Available
12 In printout of call record, serial number is printed. 0 : NO
1: YES
13 In immediate printout of call record, serial number is printed. 0 : NO
1: YES
15 In Immediate Printout Memory has overflowed, the following
message is printout.
0: NO
1: YES
16 Operation for displaying the totaled call charge of call records on
each station:
0 : Not available
1 : Available
17 Stations of which information can be displayed or printed by
Front Desk Terminal (FDT)
In case 2 sets of FDT are installed in the system, the following
stations are allocated to each of the FDT by setting “1” for the
2nd data.
• No. 0 FDT: Stations belong to Large Group 300-303
• No. 1 FDT: Stations belong to Large Group 304-307
0 : All stations
1 : Designated stations only
Continued on next page
CHECK IN SET
** **
2002 10/15 10: 14 TUE
BUFFER MEMORY EVACUATION
** **
RESET
+
CR
DET
+
SET
(
)
/
+
STA. No.
CMD000
To Next Page
Loading...
