– 787 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
SMDR/CIS/PMS FUNCTIONS (1)
D000
: Initial Data
1ST DATA
2ND DATA
DATA FUNCTION
35 In printout of long-time call, detailed information of call records
is printed out.
NOTE: The printout of long-time call is assigned by
CMD001>10. See CMD001>10
0: NO
1: YES
36 Call Duration is printed out in each call record 0 : YES
1: NO
37 In printout of call record, “T” is printed beside the transferred
station number.
0: YES
1: NO
41 Action when the memory for SMDR has overflowed 0 : No new data is stored
1 : New data is stored by deleting the
oldest data
60 Contents of dial information to be sent out to SMDR
NOTE: Access code is assigned by CM35 Y=44.
0 : Only the called party’s number is
sent out
(The access code is not included)
1 : All the dial information inclusive
of the access code is sent out
61 In Call Record print, the access code dialed is added. 0 : NO
1: YES
64 In Call Record print, Account Code is printed out. 0 : NO
1: YES
66 Print queuing is provided by the printout operation during printer
busy, off-line or short of paper.
0 : Not provided (Error indication)
1 : To provide
68 Send ISDN call charge information (AOC) to SMDR with
NEAX 2400 IMS format
[Australia/France]
0: Not sent
1: To send
69 Change Guest Name by room change message from PMS 0 : Not available
1 : Available
Continued on next page
CMD000
To Next Page
Loading...
