– 788 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
SMDR/CIS/PMS FUNCTIONS (1)
D000
: Initial Data
1ST DATA
2ND DATA
DATA FUNCTION
70 SMDR service for incoming call 0 : Effective only for incoming calls
with Account Code entered
1 : Effective for all incoming calls
71 Add the first fixed digit to the last 4 digits of 5-digit station num-
ber on SMDR output
See CMD000>252, CMD001>189
0: Not add
1: To add
72 Authorization Code is printed out 0 : NO
1: YES
76 Send detail information for tandem calls to SMDR for Central-
ized Billing-CCIS
0: Not sent
1: To send
77 Send detail information of Tandem calls to SMDR which is set to
“4” by CMD001>80/100/120/140
0: Not sent
1: To send
78 Send detail information of Tandem calls to SMDR which is set to
“5” by CMD001>80/100/120/140
0: Not sent
1: To send
79 Contents of Tandem call information to be sent out to CCIS or
SMDR Terminal
0 : Only outgoing call information
1 : Both outgoing and incoming call
information
87 Send Check Out complete message to PMS when PBX receives
Check Out message from PMS
0: Not sent
1: To send
88 Send message to PMS, if a checked out station is originating a
C.O. call.
0: Not sent
1: To send
Continued on next page
CMD000
To Next Page
Loading...
