NEC UNIVERGE NEAX 2000 IPS - Page 850

– 826 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
SMDR/CIS/PMS FUNCTIONS (2)
D001
: Initial Data
1ST DATA
2ND DATA
DATA FUNCTION
239 Direction for sending of Centralized Billing information from local
office
NOTE 1: Assign 0 for local office.
Assign 1 or 2 for center office.
NOTE 2: The billing information is sent to SMDR terminal with
NEAX 2400 IMS Format.
0 : Not Centralized Billing office
(Local office)
1 : SMDR Terminal which is set to
“4” by CMD001>80/100/120/140
(Center office)
2 : SMDR Terminal which is set to
“5” by CMD001>80/100/120/140
(Center office)
250 Function of OPE (No. 0-3) LED on AP00 card 0 : Indicates the status of data trans-
mission on each port
(See left column)
1 : Indicates the status of signal leads
on No. 0 port
(See left column)
2 : Indicates the status of signal leads
on No. 1 port
(See left column)
3 : Indicates the status of signal leads
on No. 2 port
(See left column)
4 : Indicates the status of signal leads
on No. 3 port
(See left column)
Continued on next page
AP00 INITIAL
2ND DATA
OPE
LED
01234
L3
L2
L1
L0
No. 3 port SD
No. 2 port SD
No. 1 port SD
No. 0 port SD
CS
CD
SD
RD
No. 0
port
CS
CD
SD
RD
No. 1
port
CS
CD
SD
RD
No. 2
port
CS
CD
SD
RD
No. 3
port
AP00 CARD
L3
L2
L1
L0
DECEMBER/02/2005
CMD001