Neopost IS-5000 User Manual

Account Management and Access Control
107
5
Setting Up to 'Accounts' Mode
In Accounts mode, users must select an account to process mail. Users can change
accounts at any time during mail processing.
Process for Implementation
To implement the mode
Accounts :
1First set up from the 'Account mode' to
Accounts by following the procedure, How
to Set up to 'Accounts' Mode
set out below.
Then you will be able to:
2 Create a structure of account groups that correspond to your reporting needs (see
Creating an Account Structure Using Groups p.113)
3 Create accounts as indicated in
Managing Accounts p.118.
How to Set up to 'Accounts' Mode
How to Set up to
'Accounts' Mode
From the Account Mode Management menu (see p.103):
1 Select the path: > Account Mode Selection (or type 5).
The
Account Mode Selection screen is displayed with the
current 'Account mode' selected.
2 Select Accounts and press [OK].
3 Depending on the previous 'Account mode', a warning
screen may be displayed. Press [OK].
The system displays a confirmation screen.
4 Press [OK] to continue and return to the Account Mode Ma-
nagement
menu.
If only one account is available, the mailing system automatically
selects it at start up.
When you activate the Accounts mode, the system creates (or re-
activates) an account
00000 by default.
OMEGA1_US.book Page 107 Vendredi, 1. octobre 2010 10:46 10

Neopost IS-5000 Specifications

General

Brand	Neopost
Model	IS-5000
Category	Digital Mailing system
Language	English