Configuring the System
219
8
Other System Settings
System Time-outs
System settings include:
• System motor time-outs
• Sleep mode time-out
The system time-outs are defined as follows:
How to Adjus t the Time-outs
How to Adjust
the Time-outs
To adjust the time-outs:
1 As a user:
The
Time-out setting
screen is displayed.
2 Select each field and type the time-outs.
3 Press [OK] to exit.
8.10 Other System Settings
Start The period of time (in seconds) the system waits for an envelope or label
after pressing . Once this time-out is reached, the machine stops.
Stop The period of time (in seconds) the system waits for the next envelope or
label after printing. Once this time-out is reached, the machine stops.
Sleep Period of inactivity (in minutes) after which the system automatically
switches to 'Sleep' mode (see
System Power Management
p.22).
You can set a longStop time-out to have time to feed the hopper
before the machine stops.
Press and type 2.7 or select the path:
> Batch settings > Time-out settings
This is a user setting that only lasts as long as you are logged in.
OMEGA1_US.book Page 219 Vendredi, 1. octobre 2010 10:46 10
To Next Page
Loading...
