Neopost IS-5000 User Manual

Configuring the System
215
8
Adjusting Display and Sounds
This section describes different parameters you can change to improve your working
conditions.
Changing the Display Language
You can choose a language among those available in the mailing system for your
mailing session (3 languages maximum).
How to Change the D isplay Language
How to Change
the Display
Language
To change the current display language:
1 As a user:
2 Select the language you want to use.
3 Press [OK] to validate.
Setting Default Display Language
You can set the default display language for user sessions as follows.
How to Change the D isplay Language by Default
How to Change
the Display
Language by
Default
To change the user language by default:
1 As supervisor (see How to Log in as Supervisor p.190):
2 Select the default language.
3 Press [OK] to validate.
8.9 Adjusting Display and Sounds
Press and type 11.1 or select the path:
> Preferences > Language
This is a user setting that only lasts as long as you are logged in.
The standby mode will delete this setting.
Press and type 3.1.1 or select the path:
> Default User Settings > Default User Preferences >
Language
This setting will be not affected by the standby mode.
OMEGA1_US.book Page 215 Vendredi, 1. octobre 2010 10:46 10

Neopost IS-5000 Specifications

General

Brand	Neopost
Model	IS-5000
Category	Digital Mailing system
Language	English