Configuring the System
228
8
Connection Settings
Type of Connection to the Postal or Online Services
To add funds or access Online Services, the mailing system can use:
• An Internet access through a high speed LAN (Local Area Network)
• A modem and an analog telephone line
• A GPRS modem (future use)
Use the procedure below to select the type of connection.
See also
• To physically connect a modem or the LAN to the base, see
Base connectors
p.291.
How to Set the Postal/ Online Services Connection
How to Set the
Postal/Online
Services Con-
nection
To set the postal/Online Services connection:
1 As supervisor (see
How to Log in as Supervisor
p.190):
The
Server Access
screen is displayed.
2 To use an analog telephone line modem, select
Modem
and
press [Ok] (or type
1). To use the LAN, select
LAN
and press
[Ok] (or type
2). Otherwise, to use the GPRS modem, select
GPRS modem
and press [Ok] (or type 3).
3 For further modem settings, see
How to Set the Modem Pa-
rameters
p.230.
For LAN settings, see
How to Set LAN Parameters
p.229.
8.12 Connection Settings
LAN settings can only be performed if the machine was actually
connected to the LAN at power-up.
Press and type 9.1 or select the path:
> Communication settings > Type of connection
OMEGA1_US.book Page 228 Vendredi, 1. octobre 2010 10:46 10
To Next Page
Loading...
Need help?
General
