Neopost IS-5000 - Maintaining the Sealer Water Network; How to Fill the Sealer Bottle

Maintenance
262
10
Maintaining the Se aler Water Network
The automatic feeder uses water for sealing envelopes. If the system is out of water,
the mailing process continues but the envelopes will not be sealed properly.
Filling the Sealer Bottle
How to Fill the Sealer Bottle
How to Fill the
Sealer Bottle
To add water:
1
Remove the bottle from
its base and turn it over.
2 Unscrew the cap and fill
the bottle with water up
to the limit marks.
3 Screw on the cap and
put the bottle back into
place.
10.2 Maintaining the Sealer Water
Network
OMEGA1_US.book Page 262 Vendredi, 1. octobre 2010 10:46 10