Neopost IS-5000 User Manual

Running Mail
70
3
Changing the Weighing Mode
At start-up, the system will select the default weighing mode set by the supervisor.
See also
• To change the default weighing mode as supervisor, see How to Change the
Default Weighing Type
p.195.
To change the weighing mode for a different type of batch of mail, see
Selecting a
Weighing Mode p.67, follow the procedure below.
How to Change the Weig hing Mode
How to Change
the Weighing
Mode
To change the weighing mode from the home screen:
1 Either:
The
Weighing modes screen is displayed.
2 Select the weighing mode.
If the WP automatic selection is activated (see Weighing Platform
Automatic Selection
p.214), you can change, from the home
screen, the weighing mode to Standard Weighing (WP) by putting
a mail piece on the Weighing Platform.
Press the Weighing mode button on the screen, or
Press and type 2.2 or select the path:
> Job settings > Weighing modes
The options displayed on the screen depend on the weighing
accessories and options connected to your mailing system.
If you select the option Differential Weighing Auto-Tape option,
make sure the Internal Label Dispenser is properly filled with
labels. See
How to Fill the Internal Label Dispenser p.86.
OMEGA1_US.book Page 70 Vendredi, 1. octobre 2010 10:46 10

Neopost IS-5000 Specifications

General

Brand	Neopost
Model	IS-5000
Category	Digital Mailing system
Language	English