Running Mail
49
3
Running Mail in Manual Weighing Modes
The mailing system offers two modes for manual weighing :
•
Manual weight entry
( ), where you enter in a known weight to calculate the
postage value. This may be used if the weight exceeds the limit of your weighing
platform but another scale has been used to determine the weight.
•
Manual postage entry
or
No weight source
( ), when you directly key in the
known postage value. Please note that if you manually enter in the postage
amount, it will not track the mail class for reporting and will not automatically print
the mail class die (that is to say “Presort First Class” for example) on the envelope.
See
Entering Postage Manually
p.66, then follow the procedure below to print in the
following manual modes:
Running Mail in Manual Weigh Modes
Running Mail in
Manual Weigh
Modes
To print on envelopes
From the home screen:
1 Press .
System motors start running.
2
To print the stamp on the
envelope, insert it into
the mail path against the
rear-guide wall, with the
side to be printed facing
upwards, and covering
the optical sensor.
The mailing system
prints postage and the
mail pieces are sent to
the mail tray or stacker.
To print on one or several
identical labels
1 Press .
A label selection screen
is displayed.
OMEGA1_US.book Page 49 Vendredi, 1. octobre 2010 10:46 10
To Next Page
Loading...
Need help?
General
