Neopost IS-5000 User Manual

Configuring the System
221
8
Time and Date Management
The time and date are required for postage and are provided by the postal authorities.
As a result, you cannot manually adjust the machine time and date.
However, you can ask the machine to check the current time and date and display
them.
See also
• Automatic Date Advance p.196.
Checking/Adjusting Time and Date
How to Check/Adju st the Machine Time and Date
How to Check/
Adjust the
Machine Time
and Date
To check/adjust the current time and date:
1 As supervisor (see How to Log in as Supervisor p.190):
The machine adjusts its time if necessary and displays time
and date values.
Daylight Savings Time Transitions
The mailing system normally auto-adjusts to Daylight Savings Time.
However, if a manual adjustment is necessary, you can use either of the following
procedures to correct the mailing system time:
• As a user: How to Unlock the PSD (Postal inspection) p.95
• As supervisor: How to Check/Adjust the Machine Time and Date p.221.
To check the time and date, make sure the connection to the
Postal Services is available. See How to Set the Postal/Online
Services Connection
p.228.
Press and type 6.4 or select the path:
> Machine settings > Machine date and time
If you are processing postage at the time when the clocks adjust
for daylight savings time, the mailing system will wait until you are
finished before displaying the new time.
OMEGA1_US.book Page 221 Vendredi, 1. octobre 2010 10:46 10

Neopost IS-5000 Specifications

General

Brand	Neopost
Model	IS-5000
Category	Digital Mailing system
Language	English