Neopost IS-5000 - How to Change the Beeps by Default; How to Enable; Disable the Beeps

Configuring the System
217
8
Enabling/Disabling Sounds
You can enable or disable the system beeps separately:
• Beeps on keys.
• Beeps on warnings and errors.
How to Enable / Di sable the Beeps
How to Enable /
Disable the
Beeps
To enable or disable the beeps:
1 As a user:
2 Select Beep on key and/or beep on error check boxes.
3 Press [OK] to validate.
Setting Default System Beeps
You can set the default beep state for users.
How to Change the Beep s by Default
How to Change
the Beeps by
Default
To change the sounds by default:
1 As supervisor (see How to Log in as Supervisor p.190):
2 Check Beep on key and/or Beep on error to enable the
sounds.
3 Press [OK] to validate.
Press and type 11.2 or select the path:
> Users Preferences > Sounds
This is a user setting that only lasts as long as you are logged in.
Press and type 3.1.2 or select the path:
> Default user settings > Default user preferences >
Sounds
OMEGA1_US.book Page 217 Vendredi, 1. octobre 2010 10:46 10