Postage and Funds Management
92
4
Managing Funds
Adding Funds (Postage)
You can add funds to the mailing system by selecting a specific whole dollar amount.
The mailing system connects to the Postal Server in order to add postage.
Note
• As supervisor, you can set up a PIN code for postage funding the mailing system
to ask for a code before funding: see
How to Set/Cancel a Funding Code
p.205.
How to Load Funds
How to Load
Funds
To load funds into the PSD:
1 Either:
2 Select > Add Funds (or type 2).
3 If the system asks for a PIN code, enter the code using the
keypad and press [OK].
The
Add funds
screen is displayed.
By default, the system displays the value of the previous
funding amount.
4 Enter the amount to add using the keypad (use C to clear
digits, twice to clear the field).
5 Press [OK] to start the connection to the postal server.
If the funding process is successful, the system displays a
message.
If funding fails, the system displays a failure message to-
4.2 Managing Funds
Pres
s
or
Press and type 7 or select the path:
> Funds
OMEGA1_US.book Page 92 Vendredi, 1. octobre 2010 10:46 10
To Next Page
Loading...
