Neopost IS-5000 User Manual

Configuring the System
202
8
Managing Imprint Memories
How to Cre ate an Imprin t Memory
How to Create
an Imprint
Memory
To create an imprint memory:
1 As supervisor (see How to Log in as Supervisor p.190):
The current list of imprint memories is displayed in the
Manage Imprint memories screen.
2 Select a line named None in the list, then press New
3 Press [OK] to create a new imprint memory.
4 Select the type of mail by pressing Standard or Permit.
5 Enter the name of the new imprint memory, then press [OK].
6 To include weight, put a mail piece on the weighing platform,
then press Next.
7 Enter the parameters, press Next to validate and display the
next list of parameters, if any.
8 Repeat previous step until the system displays the name of
the new imprint memory in the list.
How to Edit / Modi fy an Imprint Memory
How to Edit /
Modify an
Imprint Memory
To edit or modify an imprint memory:
1 As supervisor (see How to Log in as Supervisor p.190):
2 Select an imprint memory in the list.
3 Press [OK] to validate.
4 Select the menu path > Edit (or type 1)
The
Imprint memory modification screen is displayed.
5 Use the arrows to select the parameters, then press [OK] to
modify the parameters.
6 Press [OK] to validate or to quit.
Press and type 4 or select the path:
> Predefined imprint management
Press and type 4 or select the path:
> Imprint memories
OMEGA1_US.book Page 202 Vendredi, 1. octobre 2010 10:46 10

Neopost IS-5000 Specifications

General

Brand	Neopost
Model	IS-5000
Category	Digital Mailing system
Language	English