Running Mail
47
3
Running Mail in Differential Weighing Modes
Differential weighing offers faster, more efficient mail processing when using an ex-
ternal weighing platform (WP). In this mode, you can place a stack or container of mail
on the weighing platform The weight is then calculated as each mail piece is removed
from the weigh platform (by calculating the differential from the amount on the
weighing platform less the weight removed).
Two differential weighing modes are available:
• Differential Weighing: when a mail piece is removed from the WP, the wieght is
determined, the rate is automatically set and the envelope hoppers' motors start
to run. If a tape is required in this mode, simply press the Label button.
• Differential Weighing Auto-Tape: when a mail piece is removed from the WP, the
weight is determined, the rate is automatically set and a label is immediately
printed.
Follow the steps below for each of the two differential weighing modes.
Steps to Run Mail in Differential Weighing Modes
Steps to Run
Mail in Differ-
ential Weighing
Modes
In
Differential Weighing Mode
()
From the home screen:
1 Select the weighing mode, place the stack of mail (or
container) on the weighing platform, then follow the ins-
tructions on the screen or the steps below.
2 Remove the first piece of mail from the top of the stack. The
mailing system displays the weight and postage, then auto-
matically starts the feeder and machine motors.
When you remove the last object from the WP, the mailing system
asks for a confirmation before printing. This allows you to use a
mail basket without having to first tare the WP.
OMEGA1_US.book Page 47 Vendredi, 1. octobre 2010 10:46 10
To Next Page
Loading...
Need help?
General
