Running Mail
48
3
3
To print directly on the
envelope, place the en-
velope on the hooper.
Mail should be placed
against the rear wall and
covering the optical
(clear) sensor.
4 If the mail piece is too
thick or too large to
process through the
machine, press
to print a label. See
Mail
Specifications
p.295
5 Repeat the previous
steps for each piece of
mail.
To quit at any time, press Back.
In
Differential Weighing Auto-Tape Mode
()
You may change the label dispenser (if you have the option
remote label dispenser installed) from the
Differential weighing
auto-tape
screen. Then:
1 Select the weighing mode, place the stack of mail (or
container) on the weighing platform, then follow the ins-
tructions on the screen or the steps below.
2 Remove the first piece of mail from the top of the stack. The
mailing system displays the weight and postage then prints
the label automatically.
3 Repeat previous step for each piece of mail.
To quit at any time, press Back.
If you inadvertently remove more than one item from the WP,
replace removed items before the weight stabilizes in order to
avoid printing the label (about 1.5 seconds).
OMEGA1_US.book Page 48 Vendredi, 1. octobre 2010 10:46 10
To Next Page
Loading...
Need help?
General
