Neopost IS-5000 - How to Activate the Automatic Weight Detection on the WP; How to De-Activate the Automatic Weight Detection on the WP

Configuring the System
214
8
Weighing Platform Automatic Selection
This functionality shall be implemented for improving the user productivity and the
ease of use of the mailing system. The user is able to change the weighing type to
the WP standard weighing by putting a mail piece onto the WP. The WP standard
weighing is automatically selected when a weight increase is detected on the WP. A
weight removal from the WP do not trigger the Weighing Platform Automatic Se-
lection.
A warning message can be displayed to the operator to confirm that the WP will be
automatically selected.
How to Activate the Automatic Weight Detection on the WP
How to Activate
the Automatic
Weight De-
tection on the
WP
To activate the automatic weight detection on the WP:
1 Log in as the Supervisor (see How to Log in as Supervisor
p.190), then:
2 Press the button Auto Weight Detection with Warning or the
button Auto Weight Detection without Warning to activate the
function.
3 Press [OK] to validate.
How to De-activate the Automatic Weight Detection on the WP
How to De-ac-
tivate the Au-
tomatic Weight
Detection on the
WP
To de-activate the automatic weight detection on the WP:
1 Log in as the Supervisor (see How to Log in as Supervisor
p.190), then:
2 Press the button No Auto Weight Detection (or type 1) to de-
activate the function.
3 Press [OK] to validate.
Press and type 3.2.10 or select the path:
> Default user settings > Base settings > Auto Weight
Detect
Press and type 3.2.10 or select the path:
> Default user settings > Base settings > Auto Weight
Detect
OMEGA1_US.book Page 214 Vendredi, 1. octobre 2010 10:46 10