Neopost IS-5000 - How to Process Mail Without Printing

Running Mail
60
3
Running 'No Printing Mail' (Sealing or Counting only)
The Print Mode [No Printing] allows you to:
• Run mail for “sealing only” without printing
• Only convey mail – without printing or sealing – for counting or testing purposes.
Recommended Steps for Processing No Printing Mail
Processing mail without printing requires the following steps:
• Select the Print Mode [ No printing ]
• Select the sealing mode if necessary
• Reset the counter if necessary
• Run the mail.
How to Process Mail without Printing
How to Process
Mail without
Printing
Once your mail is ready:
1 Confirm you are on the Print Mode [ No Printing ]. The name
of the Print Mode is indicated on the first line of the home
screen as illustrated below.
If necessary, see
How to Change the Print Mode p.62.
2 Reset the item counter: see Resetting the Item Counter p.41.
3
Then, run mail. Place the
envelope (or identical
set) on the hopper. Mail
should be placed
against the rear wall and
covering the optical
(clear) sensor. Press
to start.
The mailing system
prints the mail pieces
and sends them to the
catch tray.
OMEGA1_US.book Page 60 Vendredi, 1. octobre 2010 10:46 10