Neopost IS-5000 User Manual

Configuring the System
211
8
GEO Code
The Weighing Platform and Dynamic Weighing Module provide mail piece weights
that have to be corrected according to the geographical location of the mailing
system, as weights can change with the altitude and latitude. The correcting geodesic
code may be entered:
• Automatically with Online Services
• Manually.
To change the GEO code manually, follow the steps below.
How to Change the G EO Code
How to Change
the GEO Code
To change the GEO code:
1 As supervisor (see How to Log in as Supervisor p.190):
2 See the map and table on the next pages to get the 5 digits
GEO code from your location altitude and latitude, and enter
the 5 digits using the keypad.
3 Press [OK] to validate.
Changing the GEO code modifies the weight values the mailing
machine delivers. Make sure you enter the correct parameter.
Press and type 6.2.2 or select the path:
> Machine settings > Accessories and module settings >
GEO code
OMEGA1_US.book Page 211 Vendredi, 1. octobre 2010 10:46 10

Neopost IS-5000 Specifications

General

Brand	Neopost
Model	IS-5000
Category	Digital Mailing system
Language	English