Neopost IS-5000 - How to Select a Sealing Mode

Running Mail
84
3
Using the Sealer
• For details about the sealing function, see Checking the Sealing Mode p.42.
How to Select a Se aling Mode
How to Select a
Sealing Mode
To select the type of sealing mode or to turn off the sealer:
1 On the control panel, either:
The
Sealing Mode screen is displayed.
2 Select the mode.
3 Press [OK] to validate, otherwise press [Back].
Press the Sealing Modes button on the home screen, or
Press and select the path:
> Job Settings >Sealing Modes (or type
2 then 5)
OMEGA1_US.book Page 84 Vendredi, 1. octobre 2010 10:46 10